How to clean the car engine without damaging it
The Cleaning a car's engine It is an important task to maintain its performance and durability. With the special engine degreaser MARDHES H50 Reduced in water and a combination of sprayer and brush to reach all corners, and rinsed with distilled water and low-pressure steamer, you can clean the engine without damaging sensitive parts. In this article, all the steps for effective engine cleaning are presented.

What is engine cleaning?
The Engine Cleaning It is a maintenance task in which dirt, dust, grease and other debris accumulated on a vehicle's engine are removed. Dirt and grease can accumulate on engine surfaces and moving parts, which can affect engine performance and reduce engine life. The engine is cleaned to keep it in good condition and ensure its efficiency and durability. There are different methods and products that can be used for engine cleaning, and it is important to follow the manufacturer's instructions and take the necessary steps to protect sensitive parts of the engine during the process.
How often do you have to clean the car engine?
The recommended frequency for the Engine Cleaning Varies depending on the vehicle manufacturer and conditions of use. In general, it is recommended to perform engine cleaning once a year or every 20,000 kilometers.
However, if the vehicle is used in high soiling conditions, such as in areas with a lot of dust or mud, the engine may need to be cleaned more frequently. It is also recommended to perform an engine cleaning after any repairs or maintenance that may have left residue on the engine. In summary, the frequency of engine cleaning will depend on the conditions of use and the recommendations of the vehicle manufacturer.
What products are safe to clean my car's engine? What tools do I need?
- Chemical: We recommend the star product used by professional workshops being the engine degreaser MARDHES H50.
- Spray gun and canister: To make the mixture of degreaser and distilled water, it will also help us when applying the product all over the surface and nooks and crannies of the engine.
- Brush or brush of normal hair bristles (they should not be hard).
- Distilled water: It could be done with running tap water but this way we will avoid water in limescale areas or simply so that it does not have current in some electrical areas of the car.
- Steamer or pressure washer: In this case select the tool as long as you make sure it is at low pressure. The steamer is more advisable as the pressure of the water jet is low but with its high temperature it helps to remove both the degreasing chemical and the dirt.
- Microfiber cloths: Have several microfiber cloths on hand, without being large as we have in our online store.
Can I clean my car's engine myself or do I need to take it to a specialized workshop?
The Cleaning a car's engine can be done by yourself as long as you follow the instructions and recommendations of the manufacturer of the vehicle and the products you use. However, if you do not have experience in this type of task or do not feel safe, it is advisable to take it to a specialized workshop where they can clean the engine safely and efficiently. Additionally, in some cases, engine cleaning may require specialized tools or equipment that are not available at home. In short, cleaning the engine can be done by yourself, but if you don't feel confident or have no experience, it's best to leave it to a professional.
How to clean my car engine without damaging it?
Cleaning a car's engine is an important task to maintain its performance and durability. With the special engine degreaser MARDHES H50 Lowered in water, you can clean the engine without damaging the sensitive parts. Below is a complete guide with all the steps for effective engine cleaning.
-
Preparation
Before you begin, make sure the engine is cool. It is also important to wear protective gloves and goggles to prevent injury and protect yourself from dirt and chemicals used in the process. -
Degreaser dilution
-
Leave the degreaser on
It is important to leave the degreaser on for a few minutes so that it can penetrate the dirt and grease and dissolve them. The recommended amount of time may vary depending on the product used, but in general, 5 to 10 minutes is sufficient. -
Low-pressure steam cleaning
Once the degreaser has acted, a low-pressure steamer can be used to clean the engine. It is important to use distilled water to prevent mineral build-up in the engine. It is recommended to maintain a safe distance and use low pressure to avoid damaging the sensitive parts of the engine. -
Final rinse
Once the entire engine has been cleaned, it can be rinsed with distilled water to remove any degreaser residue and dirt. It is recommended to use a low-pressure nozzle and make sure not to point directly at sensitive parts of the engine. -
Drying and final cleaning
Once the entire engine has been rinsed, it can be dried with a clean towel or air compressor. It is important to make sure that all areas of the engine are dry before removing the covers. Finally, the engine can be cleaned and polished with a metal cleaner and a clean cloth to give it a glossy finish.
The Cleaning a car's engine It is essential to maintain its performance and durability. With the special MARDHES H50 engine degreaser reduced in water and the help of a sprayer and brush to reach all corners, and a rinse with distilled water and low-pressure steamer, you can clean the engine without damaging the sensitive parts. Follow the steps presented in this guide to get the best results. Remember that engine cleaning should be carried out regularly to ensure good performance of the vehicle.
Escribe un comentario