INDRA S1+P SPORTS SHOE

INDRA S1P NETWORK - PROTECTION WITHOUT REST

Floor

• Midsole, antistatic polyurethane expanded black color.

• Sole, compact red antistatic polyurethane.

Both specific for safety footwear, complying with the analyses indicated by the safety regulations of:

• Bending resistance.
• Abrasion resistance.
• Tear resistance.
• Resistance to hydrocarbons and oils (FO).
• Slip Resistance (SRC).
• Antistatic (A).
• Absorption of energy in the heel (E).

Toe and insole

• Non-metallic, amagnetic and athermal toe. Fiberglass. 200 J

• Non-metallic anti-drill insole. >1100 N Antistatic "Zero penetration"

Regulations and risks covered

• UNE IN ISO 20345:2011
• S1P+SRC
• S1 x SB+A+E+FO
• SB - basic requirements. Impact resistant toe not less than 200 J and against compression not less than 15 KN.
• A - antistatic footwear.
• E - energy absorption in the heel not less than 20 J. • FO - resistance to hydrocarbons. • P - drilling resistance not less than 1100 Newton • CRS - slip resistance on ceramic tile with soap and on steel with glycerin.

Cut

• Padel racket, ancora, heels and back, high-strength red-black multilayer technical fabric, rear reinforcement and black beef sawdust leather armour, with thickness of 1.4 – 1.6 mm. Both special for safety complying with the analyses indicated by the regulations of resistance to tearing, abrasion, absorption and penetration of water, permeability and steam coefficient, etc.

• Padel racket lining, white TST (non-woven fabric), with thickness of 1.4 mm, complying with the analyses indicated by the regulations of resistance to tearing, abrasion, permeability and steam coefficient, etc.

• Heel lining, back, neck and tongue, red "Shoe-tech" fabric with special thickness of 1.4 mm

compliance with the analyses indicated by the regulations for tear resistance, abrasion, permeability and steam coefficient, etc.

• Tab, black 3D grille, on latex foam, complying with the analyses indicated by the regulations of tear resistance, abrasion, etc.

• Closure, has laces to ensure proper fastening to the foot.

• Neck, high-strength black multilayer technical fabric, on latex foam, complying with the analyses indicated by the regulations of tear resistance,

abrasion, etc.

• Palmilla, high tenacity multilayer textile braiding (anti-perforation template), antistatic and white, complying with the analyses indicated by the Regulations of resistance to drilling (0 mm), absorption and disabsorption of water, etc...

• Insole, polyurethane, high recovery thermoformed, on black fabric, antibacterial and fungicide, complying with the analyses indicated by the regulations on tear resistance, abrasion, water absorption and deabsorptionEtc.