TASKI Tapi Extract C1B Carpet Shampoo for professional cleaning
Diversey TASKI Tapi Extract C1B carpet shampoo is designed to clean carpets and upholstery using the injection-extraction method. It also combines wetting agents and emulsifiers that help loosen dirt from the fabric. It therefore restores carpets affected by dust, odours and accumulated residues without resorting to aggressive cleaning methods.
Its pH-neutral formula has been tested by the Woolsafe Institute. Consequently, it is suitable for use on any type of carpet, including woollen carpets, provided that compatibility and colourfastness are first checked on an inconspicuous area.
O.N.T. technology to neutralise unpleasant odours
A carpet should not only look clean; it should also smell clean. That is why TASKI Tapi Extract C1B incorporates O.N.T. (Odour Neutralising Technology), developed to neutralise the molecules responsible for unpleasant odours. Thus, the fragrance does not merely mask the odour: it improves the perception of hygiene in the space.
- Neutralises unpleasant odours in carpets, rooms and enclosed areas.
- Leaves a pleasant, long-lasting fragrance after cleaning.
- Enhances the user experience in hotels, offices and waiting rooms.
Carpet shampoo for hotels, offices and high-traffic areas
This carpet shampoo is particularly useful in areas where the carpet accumulates dust, odours and dirt due to constant footfall. It also helps to effectively remove dust and allergy-causing dust mites. It is therefore an excellent solution for improving the perceived cleanliness of professional spaces.
Recommended applications
- Hotels: guest rooms, corridors, lounges, event areas and carpets in communal areas.
- Offices: offices, meeting rooms, reception areas and areas with technical carpet.
- Residential and communal facilities: frequently used textile areas.
- Upholstery: sofas, armchairs and compatible textile surfaces.
Professional instructions for use
Injection-extraction method
First, vacuum the carpet to remove dust, stains and loose debris. Next, add the product to the spray bottle filled with water and apply the solution sparingly over a maximum area of 40–50 m² at a time. Leave it to work for around 10 minutes, ensuring the sprayed area does not dry out.
Finally, extract the solution from the carpet with clean water using a suitable machine. If necessary, use an anti-foaming agent. Also, brush the carpet pile whilst it is still damp to speed up drying and improve the finish.
Direct method
Vacuum the carpet before starting. Then, dispense the product into the machine’s water tank and spray onto the carpet. Also, brush the carpet pile whilst it is still damp to promote more even drying.
Method for removing stains and residues
First, vacuum the area. Then, pre-wet the area around the stain with fresh water. Apply the product to the dampened stain and leave it to work for a short while. Finally, rinse with fresh water and vacuum up the water immediately.
Important precautions before use
- Always check colour fastness and compatibility with the material in an inconspicuous area.
- Do not place furniture on the carpet until it is completely dry.
- Protect furniture legs with plastic or aluminium foil to prevent rust or damage to the varnish.
- This stain removal method is only suitable for carpets installed with water-resistant adhesive and on a water-resistant underlay.
Professional tip for best results
The key is to vacuum thoroughly before applying the product. Furthermore, it is not advisable to saturate the carpet with too much solution, as this increases drying time. Therefore, work in sections, allow the product to work for the recommended time and always rinse with clean water.
Internal link: View products for cleaning carpets and upholstery
External link: Manufacturer Diversey
